LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Liberty Limited, 2.8 5 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Sensor-Camshaft Position >> Removal >> 2.8L TURBODIESEL

2.8L TURBODIESEL

Fig 1: Camshaft Position (CMP) Sensor
GC0026415Courtesy of DAIMLERCHRYSLER CORP.
1 - CAMSHAFT POSITION (CMP) SENSOR
  1. Disconnect negative battery cable.
  2. Remove engine cover. Refer to appropriate ENGINE - SERVICE INFORMATION article.
  3. Disconnect CMP sensor electrical connector. See Fig 1.
  4. Remove CMP sensor (1) retaining bolt and remove sensor from cylinder head cover/intake manifold. See Fig 1.
scientia non olet · About LEMON Manuals