LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Liberty Limited, 2.8 5 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Antilock Brake >> Removal

Module-Antilock Brake: Removal

Fig 1: Removing/Installing ABM Module & ABM Unit
GC0025535Courtesy of DAIMLERCHRYSLER CORP.
1 - ABM MODULE
2 - ABM MODULE MOUNTING SCREWS
3 - ABM UNIT
4 - ELECTRICAL CONNECTOR
5 - MOUNTING BRACKET
  1. Remove the negative battery cable from the battery.
  2. Pull up on the ABM harness connector (4) release and remove connector. See Fig 1.
  3. Remove the pump connector from the ABM.
    Fig 2: ABM Mounting
    GC0025536Courtesy of DAIMLERCHRYSLER CORP.
    1 - BRAKE LINES
    2 - ABM UNIT
    3 - MOUNTING NUTS
  4. Remove the brake lines (1) from the ABM (2).
  5. Remove the ABM (2) mounting nuts (3). See Fig 2.
  6. Remove the ABM unit from the vehicle.
    Fig 3: Removing/Installing ABM Module & ABM Unit
    GC0025535Courtesy of DAIMLERCHRYSLER CORP.
    1 - ABM MODULE
    2 - ABM MODULE MOUNTING SCREWS
    3 - ABM UNIT
    4 - ELECTRICAL CONNECTOR
    5 - MOUNTING BRACKET
  7. Remove the ABM module (1) mounting screws (2) from the ABM unit (3). See Fig 3(Refer to BRAKES/HYDRAULIC/MECHANICAL/HCU (HYDRAULIC CONTROL UNIT) - DISASSEMBLY).
scientia non olet · About LEMON Manuals