LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Liberty Limited, 2.8 5 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Heated Seat Module >> Installation

Heated Seat Module: Installation

Fig 1: Heated Seat Module Location
GC0026402Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the seat wire harness connector (3) to the connector receptacle on the side of the heated seat module (2).
  2. Install the heated seat module (2) on its mounting bracket under the front seat (1).
  3. Verify heated seat system operation.
scientia non olet · About LEMON Manuals