3.0L - Diesel

Fig 1: Generator Electrical Connectors - Diesel

Courtesy of DAIMLERCHRYSLER CORP.

Position generator to engine.
Install battery B+ cable eyelet (1) and nut (2) to generator mounting stud (3).
Snap plastic insulator cap to B+ output terminal mounting stud.

Fig 2: Removing/Installing Generator - Diesel
Courtesy of DAIMLERCHRYSLER CORP.
Install two upper mounting bolts (1) finger tight only.
Install throttle body (four bolts).
Install throttle body-to-cylinder head support bracket (four bolts).
Raise vehicle.

Fig 3: Generator Mounting Bolts - Diesel
Courtesy of DAIMLERCHRYSLER CORP.
Install two lower mounting bolts (2) and tighten.

Fig 4: Generator Electrical Connectors - Diesel
Courtesy of DAIMLERCHRYSLER CORP.
Lower vehicle.

Fig 5: Removing/Installing Generator - Diesel
Courtesy of DAIMLERCHRYSLER CORP.
Tighten two generator upper mounting bolts (1).
Install generator drive belt. Refer to COOLING for procedure.
Install air filter housing (one bolt).
Install air filter element and air filter housing cover.
Install coolant reservoir tank mounting bolt and coolant tank.
Install plastic dress-up cover at top of engine.
Connect negative battery cable to battery.