LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Limited, 5.7 2, RWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System (Service Information) >> Front Suspension >> Clevis Bracket >> Installation

Clevis Bracket: Installation

Fig 1: Identifying Clevis Bracket & Shock
GC0026761Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the clevis bracket (3) to the shock (1) and tighten bolt (2) to 122 N.m (90 ft. lbs.).
    Fig 2: Identifying Stabilizer Link, Tie Rod End & Clevis Bolt
    GC0026784Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: Orientation of the flag bolt is critical Flag and head of the bolt (7) must be installed on the forward side of the lower control arm. 
  2. Install the lower stabilizer link bolt (6) and tighten to 115 N.m (85 ft. lbs.).
    Fig 3: Identifying Clevis Bracket & Shock
    GC0026761Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the lower clevis bolt/nut (4) at the lower control arm and tighten to 169 N.m (125 ft. lbs.).
    Fig 4: Removing/Installing Upper Ball Joint At Knuckle
    GC0026767Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the upper ball joint (2) into the knuckle (3) and tighten the nut to 95N.m ( 70ft. lbs.).
    Fig 5: Removing/Installing Caliper
    GC0026764Courtesy of DAIMLERCHRYSLER CORP.
  5. Install the disc brake rotor.
  6. Install the caliper adaptor mounting bolts (3) to 25 N.m ( 18 ft. lbs.).
  7. Install the tire and wheel assembly.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals