LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.7L Engine (Service Information)) >> Switch-Oil Pressure >> Removal

Switch-Oil Pressure: Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Oil Pressure Sending Unit
GC0011823Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative cable from the battery.
  2. Raise vehicle on hoist.
  3. Remove front splash shield.
  4. Disconnect oil pressure sender connector (4).
  5. Remove the pressure sender (2).
scientia non olet · About LEMON Manuals