LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.7L Engine (Service Information)) >> Mount-Engine Rear >> Installation >> 4X4

Mount-Engine Rear: Installation: 4X4

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Engine Rear Mount (4X4)
GC0027234Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the transmission mount (1) on the transmission. Install the bolts (2) that attach the transmission mount to the transmission.
  2. Torque the bolts to 30 N.m (22 ft.lbs.) torque.
  3. Install the crossmember.
scientia non olet · About LEMON Manuals