LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Starting System (Service Information)) >> RELAY, Starter >> Installation >> Installation

RELAY, Starter: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push down firmly on starter relay until terminals are fully seated into PDC receptacle.
  2. Install PDC cover.
  3. Connect battery cable.
scientia non olet · About LEMON Manuals