LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.7L Engine (Service Information)) >> Mount-Engine Rear >> Installation >> 4X2

Mount-Engine Rear: Installation: 4X2

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Engine Rear Mount (4X2)
GC0027233Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the transmission mount bracket (2), if removed.
  2. Position the transmission mount (3) on the transmission mount bracket (2). Install the fasteners (1) that attach the transmission mount to the bracket.
  3. Torque the bolts to 30 N.m (22 ft. lbs.) torque.
  4. Install the crossmember.
scientia non olet · About LEMON Manuals