LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Overhead Console (Service Information)) >> Sensor-Ambient Air Temperature >> Removal

Sensor-Ambient Air Temperature: Removal

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the grille, (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .
  3. Disconnect the wire harness connector from the ambient temperature sensor.
  4. Release the ambient temperature sensor from the retaining bracket.
  5. Remove the ambient temperature sensor from the vehicle.
scientia non olet · About LEMON Manuals