LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Charging System (Service Information)) >> Generator >> Removal >> 5.7/6.1L

Section 188 (Charging System (Service Information)): Generator: Removal: 5.7/6.1L

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing / Installing Generator - 5.7L
GC0118401Courtesy of CHRYSLER LLC
WARNING: Disconnect the negative cable from the battery before removing the battery output wire (B+ wire) from the generator. Failure to do so can result in injury or damage to the electrical system.
  1. Disconnect negative battery cable at battery.
  2. Remove generator drive belt.
  3. Unsnap plastic insulator cap from B+ output terminal.
  4. Remove B+ terminal mounting nut at rear of generator. Disconnect terminal from generator.
  5. Disconnect field wire connector (3) at rear of generator by pushing on connector tab.
  6. Remove 2 generator mounting bolts (1).
  7. Remove generator (2) from vehicle.
scientia non olet · About LEMON Manuals