Sensor-Camshaft Position: Removal: 5.7L

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: CMP Location - 5.7L

Courtesy of DAIMLERCHRYSLER CORP.

The Camshaft Position Sensor (CMP) is located on right side of timing chain cover below generator (1).

Disconnect electrical connector (3) at CMP sensor.

Fig 2: CMP Sensor Removal/Installation - 5.7L V8
Courtesy of DAIMLERCHRYSLER CORP.
Remove sensor mounting bolt (3).
Carefully twist sensor (2) from cylinder head.
Check condition of sensor o-ring.