Section 12 (Ignition System (Service Information)): Coil-Ignition: Removal: 5.7L
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Depending on which coil (3) is being removed, the throttle body air intake tube or intake box may need to be removed to gain access to coil.
- Unlock electrical connector (1) by moving slide lock first. Press on release lock while pulling electrical connector (1) from coil.
- Clean area at base of coil with compressed air before removal.
- Remove two mounting bolts (2) (note that mounting bolts are retained to coil).
- Carefully pull up coil (3) from valve cover (4) with a slight twisting action.
- Remove coil (3) from vehicle.