LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Ignition System (Service Information)) >> Coil-Ignition >> Installation >> 5.7L

Section 12 (Ignition System (Service Information)): Coil-Ignition: Installation: 5.7L

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying 5.7L Ignition Coil
GC0038210Courtesy of DAIMLERCHRYSLER CORP.
  1. Using compressed air, blow out any dirt or contaminants from around top of spark plug.
  2. Position ignition coil (3) into valve cover (4) and push onto spark plug. Twist coil into position.
  3. Install 2 coil mounting bolts (2). Tighten to 12 N.m (105 in. lbs.).
  4. Connect electrical connector (1) to coil by snapping into position.
  5. If necessary, install throttle body air tube.
scientia non olet · About LEMON Manuals