LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.7L Engine (Service Information) >> Structural Cover >> Removal

Structural Cover: Removal

Fig 1: Removing/Installing Structural Cover
GC0003786Courtesy of DAIMLERCHRYSLER CORP.
1 - BOLT
2 - BOLT
3 - BOLT
  1. Raise vehicle on hoist.
  2. Remove the left hand exhaust pipe from exhaust manifold.
  3. Loosen the right hand exhaust manifold-to-exhaust pipe retaining bolts.
  4. Remove the eight bolts (1,2,3) retaining structural cover in the sequence shown.
  5. Pivot the exhaust pipe downward and remove the structural cover.
scientia non olet · About LEMON Manuals