LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Fuel System) >> Fuel Injection - Gas >> Sensor-Map >> Removal >> 5.7L

Fuel Injection - Gas: Sensor-Map: Removal: 5.7L

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: MAP Sensor Location - 5.7L
GC0013147Courtesy of DAIMLERCHRYSLER CORP.

The Manifold Absolute Pressure (MAP) sensor (3) is mounted at the back of the intake manifold (4). See Fig 1.

Fig 2: Removing/Installing MAP Sensor - 5.7L
GC0006596Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect electrical connector at sensor by sliding release lock out (1). See Fig 2. Press down on lock tab (2) for removal.
  2. Rotate sensor 1/4 turn counter-clockwise for removal.
  3. Check condition of sensor o-ring.