LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows (Service Information) >> Switch-Power Window >> Removal

Switch-Power Window: Removal

The driver and front passenger side power window switch is included in the window/lock switch.  (Refer to ELECTRICAL/POWER LOCKS/POWER LOCK SWITCH - REMOVAL) for the service procedures.

Fig 1: Removal & Installation Of Door Switch
GC0029465Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the door trim panel (Refer to BODY/DOORS - REAR/TRIM PANEL - REMOVAL) .
  3. Remove switch from door trim panel.