Nag1 Automatic Transmission (Service Information): GEARTRAIN-Planetary: Disassembly

Fig 1: Output Shaft With Center and Rear Planetary Geartrain

Courtesy of DAIMLERCHRYSLER CORP.

1 - TEFLON RINGS	7 - DRIVING CLUTCH K3
2 - OUTPUT SHAFT WITH CENTER PLANETARY CARRIER	8 - THRUST WASHER
3 - NEEDLE BEARING	9 - AXIAL NEEDLE BEARING
4 - THRUST WASHER	10 - SHIM
5 - REAR PLANETARY GEAR SET	11 - RETAINING RING
6 - REAR HOLLOW SHAFT/FREEWHEELING CLUTCH F2

1. Remove upper two visible Teflon rings (1) from output shaft. See Fig 1.
2. Remove retaining ring (11), shim (10), thrust needle bearing (9) and thrust washer (8) from output shaft.
3. Remove clutch K3 (7).
4. Remove rear tubular shaft/freewheeling clutch F2 (6) from output shaft. See Fig 1.
5. Remove rear gear set (5) with integrated tubular shaft of center gear set from output shaft.
6. Remove thrust washer (4).