LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (4.7L Engine (Service Information)) >> Mount-Engine Front >> Installation

Mount-Engine Front: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Engine Mount
GC0027232Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the engine mount (1).
  2. Torque the bolts to 30 N.m (22 ft.lbs.) torque.
  3. Lower the engine.
  4. Install the thru bolts and nuts
  5. Lower vehicle.
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals