Section 91 (Anti-Lock Brake System (Service Information)): Electrical: Sensor-Dynamics: Removal
WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - DYNAMICS SENSOR |
| 2 - NUT |
| 3 - ELECTRICAL CONNECTOR |
- Remove the center console. Refer to REMOVAL .
- Disconnect electrical connector (3) from the dynamics sensor (1).
- Remove the two nuts (2) securing the sensor to the floor.
- Remove the sensors.