Section 91 (Anti-Lock Brake System (Service Information)): Electrical: Sensor-Dynamics: Installation

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Dynamics Sensor

Courtesy of CHRYSLER LLC

1 - DYNAMICS SENSOR

2 - NUT

3 - ELECTRICAL CONNECTOR

Install the dynamics sensor (1) to the vehicle.
Install the electrical connector (3)
Install the two retaining nuts (2) and tighten to 9 N.m (80 in. lbs.).
Install the floor console.