LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC Systems (Service Information)) >> Controls >> Relay-Blower Motor >> Removal

Relay-Blower Motor: Removal

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Blower Motor Relay
GC0028315Courtesy of CHRYSLER LLC
NOTE: LHD gasoline model shown. Diesel and RHD models similar.
  1. Disconnect and isolate the negative battery cable.
  2. Open the cover of the power distribution center (PDC) (1) located in the engine compartment.
    NOTE: Refer to the fuse and relay layout map on the inside of the PDC cover for blower motor relay location.
  3. Remove the blower motor relay (2) from the PDC.
scientia non olet · About LEMON Manuals