Section 21 (Anti-Lock Brake System (Service Information)): Sensor-Dynamics: Removal

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Dynamics Sensor

Courtesy of DAIMLERCHRYSLER CORP.

1 - DYNAMICS SENSOR

2 - NUT

3 - ELECTRICAL CONNECTOR

Remove the center console. (Refer to BODY/INTERIOR/FLOOR CONSOLE - REMOVAL) .
Disconnect electrical connector (3) from the dynamics sensor (1).
Remove the two nuts (2) securing the sensor to the floor.
Remove the sensors.