Section 21 (Anti-Lock Brake System (Service Information)): Sensor-Dynamics: Installation
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - DYNAMICS SENSOR |
| 2 - NUT |
| 3 - ELECTRICAL CONNECTOR |
- Install the dynamics sensor (1) to the vehicle.
- Install the electrical connector (3)
- Install the two retaining nuts (2) and tighten to 9 N.m (80 in. lbs.).
- Install the floor console.