Standard Procedure - Programming The ECM/Pcm Using The DRB®
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Read all notes and cautions for programming procedures.
(Refer to ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)
.
- Connect a battery charger to the vehicle.
- Connect the DRB®.
- Select "THEFT ALARM".
- Select "SKIM-SKREEM".
- Select "MISC".
- Select "PCM REPLACED".
- Select "ENTER PIN".
- Verify correct information.