LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Electronic Control Modules (Service Information)) >> Module-Transmission Control >> Removal >> 3.7L Gas/3.0L Diesel Vehicles

3.7L Gas/3.0L Diesel Vehicles

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Dash Panel Silencer Pad
GC0027625Courtesy of DAIMLERCHRYSLER CORP.
1 - CUT LINES
2 - DASH PANEL SILENCER PAD
3 - STEERING COLUMN LOCATION
  1. Locate the transmission control module on the dash panel, under the dash panel silencer pad (2), just to the right of the steering column. See Fig 1.
  2. Locate the cut lines (1) marked on the silencer pad. Cut the pad along these lines.
    Fig 2: Transmission Control Module Location - 3.0L & 3.7L Vehicles
    GC0027623Courtesy of DAIMLERCHRYSLER CORP.
    1 - TRANSMISSION CONTROL MODULE
    2 - DASH PANEL
    3 - WIRING CONNECTORS
  3. Remove the transmission control module from the dash panel or bracket.
  4. Disconnect the wiring harness connectors (3) from the module.
  5. Remove the module from the vehicle.
scientia non olet · About LEMON Manuals