LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Electronic Control Modules (Service Information)) >> Module-Final Drive Control >> Removal

Module-Final Drive Control: Removal

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lifting/Lowering Rear Seat
GC0027612Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Lift up rear seat to expose the park assist module and final drive control module.
    Fig 2: Removing/Installing Module Electrical Connector
    GC0027611Courtesy of DAIMLERCHRYSLER CORP.
  3. Disconnect the module electrical connector (1).
  4. Using a trim stick (special tool #C-4755) or equivalent, gently pry back on the retaining tabs on the mounting plate (2) and remove module.