LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Electronic Control Modules (Service Information)) >> Module-Final Drive Control >> Installation

Module-Final Drive Control: Installation

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Module Electrical Connector
GC0027611Courtesy of DAIMLERCHRYSLER CORP.
  1. Place the final drive control module (3) in its location on the mounting plate (2) and firmly snap into place.
  2. Connect the electrical connector (1).
    Fig 2: Lifting/Lowering Rear Seat
    GC0027612Courtesy of DAIMLERCHRYSLER CORP.
  3. Lower the rear seat back down into position.
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals