LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Electronic Control Modules (Service Information)) >> Module-Front Control >> Installation

Module-Front Control: Installation

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Front Control Module
GC0027615Courtesy of CHRYSLER LLC
NOTE: If installing a new service part, remove the plastic cover from the original module and install it on the new one.
  1. Connect the Integrated Power Module (IPM) (3) to the Front Control Module (FCM) (1) by lining up the electrical connector and pushing the two together.
  2. Install the four fasteners (2) securing the FCM (1) to the IPM (3).
  3. Install the IPM. Refer to INSTALLATION .
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals