LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Electronic Control Modules (Service Information)) >> Module-Engine Control >> Operation >> Limp-In Mode

Limp-In Mode

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

If there is a fault detected with the accelerator pedal position sensor, the ECM will set the engine speed at 1100 RPM.

scientia non olet · About LEMON Manuals