Fuel Injection - Gas: Injector-Fuel: Installation: 3.7L
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Install fuel injector(s) (3) into fuel rail assembly (4) and install retaining clip(s) (2). See Fig 1.
- If same injector(s) is being reinstalled, install new o-ring(s).
- Apply a small amount of clean engine oil to each injector o-ring. This will aid in installation.
- Install fuel rail (Refer to FUEL SYSTEM/FUEL DELIVERY/FUEL RAIL - INSTALLATION) .
- Start engine and check for fuel leaks.