LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Fuel System) >> Fuel Injection - Diesel >> Sensor-Camshaft Position >> Removal

Sensor-Camshaft Position: Removal

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Cmp Sensor
GC0039517Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect negative battery cable. (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - REMOVAL)
  2. Remove engine cover.
  3. Disconnect camshaft position sensor electrical connector.
  4. Remove retaining bolt and remove sensor.
scientia non olet · About LEMON Manuals