LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine & Automatic Transmission Cooling System) >> Engine >> Pump-Water >> Installation >> 5.7L

Section 103 (Engine & Automatic Transmission Cooling System): Engine: Pump-Water: Installation: 5.7L

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 5.7L Water Pump
GC0028749Courtesy of CHRYSLER LLC
1 - GENERATOR
2 - A/C COMPRESSOR
3 - WATER PUMP
4 - HEATER BYPASS TUBE
  1. Install water pump and mounting bolts. Tighten mounting bolts to 24 N.m (18 ft. lbs.).
  2. Install heater hoses.
  3. Install upper and lower radiator hoses.
  4. Install belt tensioner assembly.
  5. Install idler pulleys.
  6. Install A/C compressor and alternator brace. Tighten bolt and nuts to 28 N.m (21 ft. lbs.).
  7. Install fan shroud assembly.
  8. Connect washer bottle wiring and hose.
  9. Install coolant fill bottle.
  10. Install fan clutch assembly.
  11. Install serpentine belt.
  12. Connect negative battery cable.
  13. Fill coolant.
  14. Pressure test coolant system