LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (3.7L Engine (Service Information)) >> Engine Mounting >> Mount-Engine Rear >> Removal >> 4X2

Mount-Engine Rear: Removal: 4X2

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Rear Mount (4X2)
GC0027233Courtesy of CHRYSLER LLC
  1. Raise the vehicle on a hoist.
  2. Using a suitable jack, support transmission.
  3. Remove the crossmember.
  4. Remove the fasteners (1) from the transmission mount to transmission.
  5. Remove the mount (3).
  6. Remove the transmission mount bracket (2), if required.
scientia non olet · About LEMON Manuals