LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Overhead Console >> Service Information >> Removal

Service Information: Removal

Fig 1: Identifying Overhead Console Components
GC0044971Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the inside rearview mirror, (Refer to BODY/INTERIOR/REAR VIEW MIRROR - REMOVAL) .
  3. Pull downward on the sides of the overhead console housing (3) firmly and evenly to disengage the snap clips from the overhead console bracket.
    Fig 2: IDENTIFYING OVERHEAD CONSOLE COMPONENTS (REAR VIEW)
    GC0045539Courtesy of DAIMLERCHRYSLER CORP.
  4. Lower the overhead console from the headliner far enough to access the wire harness connectors.
  5. Disconnect the roof wire harness connectors from the Electronic Overhead Module (EOM) (3) and sunroof switch (2) if equipped.
  6. Remove the overhead console from the vehicle.