LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Accessories Control Systems >> Overhead Console >> Sensor-Ambient Air Temperature >> Installation

Sensor-Ambient Air Temperature: Installation

  1. Position the ambient temperature sensor in the vehicle.
  2. Secure the ambient temperature sensor into the retaining bracket.
  3. Connect the wire harness connector to the ambient temperature sensor.
  4. Install the grille, (Refer to BODY/EXTERIOR/GRILLE - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals