LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> Nag1 Automatic Transmission - Electrical Diagnostics >> Electrical Diagnostics >> DTC Troubleshooting >> P2767-Input Speed Sensor 2 Circuit No Signal >> Monitor Conditions

Monitor Conditions

  1. When Monitored: 

    Engine speed greater than 450 RPM with none of the following DTCs present: engine speed, TCM undervoltage, output speed sensor, and/or rear wheel speed DTCs. Also required are all wheel speeds above 250 RPM and no wheel slip detected (signal from the ABS system).

scientia non olet · About LEMON Manuals