LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Rack & Pinion Power Steering System (Service Information) >> Column >> Steering Wheel >> Installation

Steering Wheel: Installation

Fig 1: Remove/Install Steering Wheel & Airbag
GC0027279Courtesy of DAIMLERCHRYSLER CORP.
  1. Install steering wheel (5) to the column
    NOTE: Do not reuse the old steering wheel bolt (3) (a new bolt must be used)
    NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.
  2. Install the new steering wheel bolt (3). Tighten the bolt to 61 N.m (45 ft. lbs.).
  3. Reconnect all the electrical connectors (2, 6 & 7).
  4. Install the drivers side air bag (1). (Refer to ELECTRICAL/RESTRAINTS/DRIVER AIRBAG - INSTALLATION) .
scientia non olet · About LEMON Manuals