Frame & Bumpers: CROSSMEMBER-Rear/Transmission: Installation

Fig 1: Crossmember & Fasteners

Courtesy of DAIMLERCHRYSLER CORP.

1. Install the crossmember and install the eight crossmember bolts (2).
2. Tighten the crossmember bolts to 54 N.m (40 ft. lbs.).
3. Remove the lifting device.
4. Install the four transmission mount bolts (1) and tighten to 54 N.m (40 ft. lbs.).
5. Install the skid plate. (Refer to FRAME & BUMPERS/FRAME/SKID PLATE-TRANSFER CASE - INSTALLATION) .