LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System & Telecommunication System (Service Information) >> Module-Hands Free >> Removal

Module-Hands Free: Removal

Fig 1: LOCATING HANDS FREE MODULE ELECTRICAL HARNESS CONNECTOR
GC0029272Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the right side cowl panel trim.
  3. Disconnect the electrical harness connector.
    Fig 2: LOCATING HANDS FREE MODULE
    GC0029271Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the mounting bracket fasteners.
  5. Remove the hands free module fasteners from the mounting bracket and remove module.
scientia non olet · About LEMON Manuals