LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Memory Seat >> Removal

Module-Memory Seat: Removal

Fig 1: Memory Seat Module - Removal/Installation
GC0027607Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - REMOVAL) .
  3. Pivot the module upward and disconnect the electrical connectors (1).
  4. Unsnap the memory seat module (4) from the side brackets.
  5. Pull the module rearward to remove it from the front of the seat frame (3).
scientia non olet · About LEMON Manuals