Fuel Level Sensor: Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, 2002 Chrysler Town & Country, and 2001 Dodge Grand Caravan. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel level sensor is mounted on fuel pump module. See Figure.
- Remove fuel pump module. See FUEL PUMP MODULE . Depress retaining tab and disconnect electrical connector for fuel pump and fuel level sensor from electrical connector from bottom side of electrical connector mounted on top of fuel pump module.
- Remove Blue locking wedge from inside of electrical connector for fuel pump and fuel level sensor. See Figure.CAUTION: Note location of wires in electrical connector for fuel pump and fuel level sensor for installation reference. Wires must be installed in correct location.
- Mark wire location in electrical connector for fuel pump and fuel level sensor for installation reference. Wires for fuel level sensor must be removed from the electrical connector for fuel pump and fuel level sensor.
- Use small screwdriver to lift locking finger away from electrical terminal on the wire. Push wire with electrical terminal from electrical connector.
- Using screwdriver, pry between fuel pump module and top of fuel level sensor to release fuel level sensor from fuel pump module. Push fuel level sensor downward, toward bottom of fuel pump module. Slide fuel level sensor from channel in fuel pump module.