LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - Removal, Overhaul & Installation) >> Computerized Engine Controls >> Transmission Control Module >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, 2002 Chrysler Town & Country, and 2001 Dodge Grand Caravan. However, it is still accessible from the selected car via links, so may be relevant.
  1. The TCM is located behind left front fender and is mounted to frame rail. See Fig 1. Disconnect negative battery cable. Raise and support vehicle.
  2. Remove left front tire/wheel. Pull back inner wheelwell to access TCM. Loosen retaining bolt and remove TCM connector. Remove 3 bolts attaching TCM to vehicle. To install, reverse removal procedure. Tighten TCM retaining bolts and connector retaining bolt to specification. See TORQUE SPECIFICATIONS .
Fig 1: Locating Transmission Control Module
G00030207Courtesy of DAIMLERCHRYSLER CORPORATION