LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 393 (HVAC Systems (Service Information)) >> Controls - Front >> Sensor-Infrared >> Removal

Controls - Front: Sensor-Infrared: Removal

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Infrared Sensor
GC0011020Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the overhead console (2) and place it on a workbench (Refer to ELECTRICAL/OVERHEAD CONSOLE - REMOVAL) .
  3. Remove the screw (3) that secures the infrared sensor (1) to the overhead console.
  4. Remove the infrared sensor from the overhead console.
scientia non olet · About LEMON Manuals