Control-A/C Heater: Installation
WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Position the A/C-heater control (2) into the instrument panel center bezel (3).
- Install the screws (1) that secure the A/C-heater control to the instrument panel center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
- Connect the wire harness connector(s) (2) to the A/C-heater control (3) and install the instrument panel center bezel (1) (Refer to BEZEL-CENTER .
- Reconnect the negative battery cable.