LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 327 (Anti-Lock Brake System (Service Information)) >> Sensor-Wheel Speed-Abs-Rear >> Diagnosis And Testing >> Rear Wheel Antilock

Rear Wheel Antilock

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Diagnosis of base brake conditions which are mechanical in nature should be performed first. This includes brake noise, lack of power assist, parking brake, or vehicle vibration during normal braking.

The RWAL brake system performs several self-tests every time the ignition switch is turned on and the vehicle is driven. The CAB monitors the system inputs and outputs circuits to verify the system is operating properly. If the CAB senses a malfunction in the system it will set a DTC into memory and trigger the warning lamp.

NOTE: The MDS or DRB III® scan tool is used to diagnose the RWAL system. For test procedures refer to DIAGNOSIS AND TESTING .
scientia non olet · About LEMON Manuals