LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 306 (HVAC System (Service Information)) >> Controls >> Relay-Clutch-A/C Compressor >> Installation

Relay-Clutch-A/C Compressor: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Integrated Power Module (IPM)
GC0006140Courtesy of DAIMLERCHRYSLER CORP.
NOTE: Refer to the fuse and relay layout map on the inside of the IPM cover for A/C clutch relay location.
  1. Position the A/C clutch relay into the receptacle of the integrated power module (IPM) (2).
  2. Align the A/C clutch relay terminals with the terminal cavities in the IPM receptacle and push down firmly on the relay until the terminals are fully seated.
  3. Install the cover onto the IPM.
  4. Reconnect the negative battery cable (1).
scientia non olet · About LEMON Manuals