LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Power Sliding Door System) >> Left B-Pillar Switch >> Installation

Left B-Pillar Switch: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the B-pillar switch electrical connector. Slide connector lock toward the switch to lock in place.
  2. Hook the lower edge of the B-pillar switch on the B-pillar trim and then push the switch firmly into position.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals