LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Lighting System - Exterior) >> Multi-Function Switch >> Installation

Multi-Function Switch: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the switch on to the steering column.
  2. Install the two retaining screws.
  3. Connect the wire harness connector.
  4. Install the upper and lower steering column shrouds. Refer to SHROUD-LOWER and SHROUD - UPPER .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals