LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor Relay >> Removal

Starter Motor Relay: Removal

  1. Disconnect and isolate battery negative cable.
  2. Unlatch and open cover on Power Distribution Center (PDC). See Fig 1.
    Fig 1: Power Distribution Center
    GC0030453Courtesy of DAIMLERCHRYSLER CORP.
    1 - POWER DISTRIBUTION CENTER (PDC)
    2 - LATCHES
    3 - COVER
    4 - RIGHT FRONT FENDER
  3. See fuse and relay layout label affixed to underside of PDC cover for starter relay identification and location.
  4. Remove starter relay from PDC.
scientia non olet · About LEMON Manuals